Sheet metal processing
The appearance of the sheet metal chassis cabinet has always been what people care about. However, after the sheet metal chassis cabinet is exposed to the air for a long time, it will be contaminated with dust or oxidized; resulting in the appearance becoming less bright. So, how should we clean the sheet metal chassis cabinet? In order to keep the appearance of the sheet metal chassis cabinet clean, the addition of the sheet metal chassis cabinet the maintenance and cleaning process is as follows:
Chassis cleaning
1. Wash the surface of the sheet metal chassis with water to clean the dirt on the surface.
2. Clean the Chassis cabinetSheet metal processing by adding soap, liquid detergent or 5% ammonia solution to the water.
3. Open the electronic Chassis, pay attention to the opening method of the Chassiscabinet, put the removed screws into the small box, and do not lose them.
4. Use a blower and a small brush to clean up the dust. The small brush can brush the gaps in capacitors and other parts, and the blower can blow the slots of each board.
5. Finally, wipe off the water. You should ensure that all scrubbing is done in the same direction, preferably from top to bottom and stacked. During the drying process, in order to scrub cleaner, we must scrub in the same direction, and then let the surface Naturally sun dried.
6. After the refueling and cleaning work is completed, install the machine in the reverse order of dismantling. Be careful not to drop the small screws into the gaps in the electronic chassis during installation, and the cleaning work is complete.
Although it is irreversible for the sheet metal chassis to become old and old, the aging phenomenon of the sheet metal chassis cabinet can be delayed through scientific cleaning of the sheet metal chassis cabinet. Keeping the clean state of the sheet metal chassis cabinet is also conducive to improving the overall Chassiscabinet productivity.
Note: If cleaning the sheet metal chassiscabinet in operation, be careful not to let water enter the sheet metal chassiscabinet to prevent accidents.
